Titanium Investment Casting
Professional Titanium Investment Casting Supplier
Taiyuan Simis Investment Casting Co., Ltd was established in 2014. After 15 years of development, it has developed from a single precision casting factory to a comprehensive mechanical product supplier that can provide precision casting, sand casting, die casting and precision machining parts.
-
Titanium Compressor WheelProduct name: high temperature titanium alloy castings Product use: widely used in metallurgical precision casting petrochemical, aerospace, shipbuilding, automotive and other fieldsread more
The company has independent rare earth oxide precision casting, graphite mold casting, composite sand mold casting titanium alloy casting technology; The company has an annual production capacity of 2,000 tons of titanium zirconium alloy castings, including more than 500 large castings and more than 1 million small and medium castings.
Why Choose Us
Professional Team
Our company employs three professor-level engineers, five senior engineers, twelve junior engineers, twenty inspectors, and approximately 350 workers.
Production Capacity
We operate one precision casting factory, one sand casting factory, one die casting factory, and two machining factories, covering an area of 8,000 square meters. Our annual output is about 500 tons of silicon glue investment castings and 2,000 tons of water glass investment castings.
Global Market
We understand the design and quality requirements of foreign customers for mechanical products. About 85% of our products are exported to North America, Europe and around the world.
Our Technical Certification
After the unremitting efforts of our all employees, our company has passed ISO, TS16949, TUV and other quality certifications.
Parameters
|
Material |
Pure Titanium/Titanium Alloy |
|
Size |
Customization |
|
Tolerance |
Customer's Drawing Request |
|
Dimensional Tolerance |
±0.25 mm per 25 mm |
|
Typical Wall Thickness |
1.5–10 mm |
|
Heat Treatment |
Annealing at 705–850°C (1300–1560°F) |
|
Mold Material |
Ceramic |
Advantages of Titanium Investment Casting
Lightweight Strength
It exhibits the highest strength-to-density ratio of any metal, for lightweight strength and durability.
01
Corrosion Resistance
When exposed to oxygen, titanium investment casting reacts, creating a thin layer of titanium oxide on the surface of the metal.
02
Durability
Titanium investment casting is extremely durable, so it is more resistant to wear and tear, and enhances the service life of equipment in which it is used.
03
Temperature Resistance
Titanium investment casting has an extremely high melting point, and exhibits minimal creep when exposed to temperature fluctuations.
04
Application Fields of Titanium Investment Casting

Aerospace field: Titanium investment casting technology can produce high-precision titanium alloy parts, such as aircraft engine blades, fuselage structural parts, etc. These parts are crucial to reducing aircraft weight and improving fuel efficiency.
Medical field: Titanium investment casting technology can accurately replicate the structure of complex medical devices, meet ergonomic requirements, and improve treatment effects.
Automobile industry: In the automobile industry, titanium investment casting technology is used to manufacture key components of high-performance automobiles, such as engine components and suspension systems.
Energy field: The application of titanium investment casting technology in the energy field is mainly concentrated in nuclear power, thermal power generation and petrochemical equipment.
Sports equipment: Titanium investment casting technology can produce sports equipment with complex shapes and smooth surfaces, improving the performance of athletes.
Marine engineering: Titanium alloy parts manufactured by titanium investment casting technology can be used in ship propulsion systems, seawater desalination equipment, etc., to improve the reliability and service life of equipment.
Titanium Investment Casting Process
Pattern fabrication
Injecting molten wax into steel dies to produce high-fidelity wax replicas of the final parts. It may involve solid patterns or wax cores for hollow castings.
PATTERN ASSEMBLY
Attaching patterns to sprues to create a wax pattern tree cluster. It allows multiple parts to be cast together.
MOLD MAKING
Repeatedly dipping the wax tree into a ceramic slurry and stucco sand to build ceramic shell molds around each pattern. Modern three-layer molds are common.
DEWAXING
Melting out the wax to leave behind hollow mold cavities. It is done in steam autoclaves or flash-fire dewaxing ovens.
Firing
Hardening the ceramic molds to prepare them for metal pouring by firing between 1600°F to 1800°F.
Casting
Pouring molten titanium alloy into the preheated ceramic molds using vacuum-assisted pouring or centrifugal casting methods.
Divesting
Removing castings from molds by water blasting, vibration, or chemical dissolution.
Finishing
Grinding off gates and runners and performing final machining or other finishing operations.
Surface Treatments Technologies
Polishing: Polishing is the process of creating a smooth and shiny surface by rubbing the metal or using a chemical action, leaving a surface with a significant specular reflection.
Painting: Painting is a technique where a device sprays a coating (paint, ink, varnish, etc.) through the air onto a surface.
Powder coating: Powder coating is a type of coating that is applied as a free-flowing, dry powder.
Chrome Plating: Chrome plating is a technique of electroplating a thin layer of chromium onto a metal or plastic object.
E-coating: E-coating is the motion of dispersed particles relative to a fluid under the influence of a spatially uniform electric field.
Anodizing: Anodizing is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts.
Send Inquiry: You can send us an inquiry via email at market@investment-casting.biz, detailing the material specifications and technical quality requirements you require. Our sales representative will contact you within 24 hours.
Get Quotation: Our professional technicians will make a detailed quotation based on the information you provide.
Drawing: Send us your drawings and we will model according to the drawings. If you don't have drawings, we also provide you with a design team.
Mold or Sample: Based on the design and price agreement, we can start making mold or samples.
Mass Production: After the mold is made, the sample is confirmed, and the payment information is received, we will place a mass production order, and after the order is completed, it can be shipped as required.

Our Quality Control
Mechanical Testing
Mechanical testing is conducted to test various mechanical properties of materials including strength, hardness, ductility, toughness, brittleness, etc. There are several types of tests such as strength testing, proof load testing, embrittlement testing, hardness testing, impact (toughness) testing, weld fracture testing, ductility testing. For the investment casting products, mechanical testing as a self-inspection ensures that the production meet the client's specific requirements.
Magnetic Particle Inspection
Magnetic particle inspection (MPI) is one of non-destructive testing (NDT) methods used to detect cracks at the surface of ferromagnetic materials such as steels and nickel-based alloys. The test method process is quick and simple in principle and application.
X-Ray Testing
X-Ray testing is the one of the best nondestructive inspection methods for detecting internal defects of castings. X-Ray testing is able to find internal defects of investment casting product including gas porosity and gas holes, shrinkage which appears as dendrite/filamentary/ jagged, cracks and so on.
Leak Testing
Leak testing plays an important role in our daily safety, environmental protection and the reliability of production processes and products of our daily lives. It thereby is a very important part of the quality control process. Basically, we use leak testing to determine whether there is air hole on the surface of casting products, and whether the sealing part will leak.
Ultrasonic Inspection
Ultrasonic nondestructive testing, also known as ultrasonic NDT or simply UT, is a method of characterizing the thickness or internal structure of a test piece through the use of high frequency sound waves.
Packaging and Delivery
|
Package |
Normally we pack investment castings with ploy bags, then put them into carton box and standard wooden cases.We can also provide custom package service according to customers’ requirements. |
|
Delivery Time |
Sample delivery time is generally 25 days after the completion of the mold, mass production is not necessarily based on the quantity requirements, generally 30-40 days. |
|
Payment Policy |
Generally, 30% deposit T/T before production ,70% balance before shipment. T/T, Trade Assurance, Paypal, Western Union, Credit Card, L/C etc. |
|
Shipping |
Sea, Air, Express |
FAQ
Find professional titanium investment casting manufacturers and suppliers in China here. Please feel free to buy high quality titanium investment casting at competitive price from our factory. For customized service, contact us now.
raw casting supply, investment casting flange parts, casting mounting bracket